====== Modulor / Vreeberg  ======

The only TPE film I could find in Europe. 

{{:soft-robotics:thermoplastic-elastomers:sebs-film.jpg?400}}

[[https://www.modulor.de/en/tpe-film-th-0-25-mm-w-400-mm-colourless-transparent-oxid.html|Product link]].

It is a **SEBS** film made by Dutch company [[https://vreeberg.nl/en/sebs-film/|Vreeberg]].


===== Sealing =====
Able to seal using [[soft-robotics:heat-sealers:pfs-300|PFS-300]] impulse heat sealer.
Current configuration:

  * **TIME**: 6
  * **PRESSURE**: Snap hit and keep pressure with my forearm, not whole body.

===== Gluing =====

Have tried many glues of all types. including a silicone sealant and Loctite 401 recommended on [[https://dm.henkel-dam.com/is/content/henkel/lt-2662a-brochure-design-guide-for-bonding-rubber-and-thermoplastic-elastomers-volume-3-2011|Henkel's design guide]]. It could glue to a PU (polyurethane tube, recommended type by Vreeerg), but the glue always disintegrated part of the film which made it weaker eventually under high pressure.

Best solution I found so far is **Zip-Ties**.