soft-robotics:molds:round-extending []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Round Extending Actuator ======

The Round Extending Actuator is an extending actuator designed by XYZAidan.

{{:soft-robotics:molds:round-extending-actuator.jpg?nolink&400|}}

===== Fabrication =====
The fabrication process is described in detail on the [[http://www.instructables.com/id/Extending-Soft-Actuator/|Instructables page]].

===== Mold files =====
The molds are available for download on [[http://www.thingiverse.com/thing:962889|Thingiverse]]. 

===== Quantities =====

     * TBD

===== Oven times =====

  * [[soft-robotics:silicones:ecoflex30|Ecoflex 30]]: ~60min

===== Air inlet =====
**Uses an adapter mold.**

From the instructables guide:
<code>
Pull the now fully-molded piece of silicone out of the adapter mold.
Take the large flathead screwdriver and push it through the opening in order to clear the inside for the
tubing. Insert the tubing into the actuator and secure it with the zip-tie.
</code>

{{:soft-robotics:molds:extending_adapter.jpg?nolink&400|}}

User Tools

Site Tools

Page Tools