thesis:budget []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Thesis Budget ======

===== Past Spending =====
<csv>
Item,Cost,Link
"Masunn 12 V DC Diaphragm, Vacuum Pump ",26.61 €,https://cloud.avner.us/index.php/f/6316
Yosoo ® DC12V 80kPa miniature vacuum pump ,39.48 €,https://cloud.avner.us/index.php/f/6315
KauPo Silicone 2Kg + Silpoxy glue + Mold releaes spray,138.51 €,https://cloud.avner.us/index.php/f/6318
HDMI Touchscreen,28.85 €,https://cloud.avner.us/index.php/f/6319
Teensy 3.6,34.00 €,https://cloud.avner.us/index.php/f/6321
Kevlar thread,12.44 €,https://cloud.avner.us/index.php/f/6323
10Pcs DIP Air Pressure Sensor ,39.12 €,https://cloud.avner.us/index.php/f/6325
TME Electronic components,36.20 €,https://cloud.avner.us/index.php/f/6326
Sound components,65.20 €,https://cloud.avner.us/index.php/f/6343
X JOINER Piece 4 WAY ,12.81 €,https://cloud.avner.us/index.php/f/6345
"4mm Male Brass Hose Barbs Barb To 1/8"" NPT ",32.25 €,https://cloud.avner.us/index.php/f/6346
Pneumatic Electric Solenoid Valve ,36.17 €,https://cloud.avner.us/index.php/f/6347
TME Electronic components,51.46 €,https://cloud.avner.us/index.php/f/6349
Teensy Audio Board,24.50 €,https://cloud.avner.us/index.php/f/6351
Waveshare touchscreen 1,40.49 €,https://cloud.avner.us/index.php/f/6357
Waveshare touchscreen 2,46.49 €,https://cloud.avner.us/index.php/f/6356
PLA – fablab,80.01 €,https://cloud.avner.us/index.php/f/15288
Plastic Pellets 1kg,25.13 €,https://cloud.avner.us/index.php/f/15089
Parafin Wax 4kg,28.50 €,https://cloud.avner.us/index.php/f/15284
Joaquin Aldunate – CAD Modeling 54 hours (20€/hr) ,"1,080.00 €",
Total,"1,878.22 €",
</csv>

===== Estimated Future Budget =====
<csv>
Item,Cost per unit,Estimated units required,Cost,Reference Link
KauPo Silicone for actuators (kg) ,40.00 €,12,480.00 €,https://tinyurl.com/yb5vurfc
Electronic/Pneumatic Components,200.00 €,1,200.00 €,
PLA  - For molds and skeleton (kg),40.00 €,3,120.00 €,https://tinyurl.com/y9qgx484
SikaBlock M960 75mm – For mold milling,569.00 €,1,569.00 €,https://tinyurl.com/y6wc7mz2
SikaBlock Prolab 75 – For mold milling,270.00 €,1,270.00 €,https://tinyurl.com/yc33kh75
CAD Modeling (month),"2,000.00 €",1.5,"3,000.00 €",
UX Design (month),"2,000.00 €",1,"2,000.00 €",
Electronic Circuit Design (month),"2,000.00 €",0.5,"1,000.00 €",
Documentary Maker/Editor (month),"2,000.00 €",0.75,"1,500.00 €",
ARTS Scholarship grant,"-1,000.00 €",1,"-1,000.00 €",
,,,,
Total,,,"8,139.00 €",
</csv>
User Tools

Site Tools

Page Tools
