Table of Contents
Triangle Pneunet
The Triangle is a Pneunet design that is based on the Slow Pneunet architecture. It is designed by Sabina Barcucci.
Fabrication
The fabrication process is described in detail on the FabAcademy 2015 page.
Mold files
The molds are available for download on the Fab Academy github page.
Converted Molds to STL: musclenurbs.zip
Quantities
- TBD
Oven times
- Top Layer - Ecoflex 30: ~15min
- Bottom Layer - Dragon Skin 30: ~35min
Air inlet
The air inlet is the basic Slow Pneunet inlet, as shown in the pic below:
