User Tools

Site Tools

Trace: • create_mold_for_body
tasks:create_mold_for_body

Discussion

AvnerusAvnerus, 2017/12/04 00:09, 2017/12/04 00:15

The mold for the body will be inspired by the Axolotl. For fastest results, I believe it's best to embed a normal LCD screen. The lower part/tail of the body should be able to bend, and hopefully enough to cover the LCD screen. Possibly the best structure for this bend is a fast pneunet.

Designs by Noa here

AvnerusAvnerus, 2017/12/04 09:47, 2017/12/04 10:31

Need to test a CNC based fast pneunet mold 30cm length and 15cm wide. Height of cell should be 6-7cm

AvnerusAvnerus, 2017/12/06 13:02

Don't forget there needs to be a place in the body for:

  • Display
  • Speaker
  • Micropohe
Enter your comment. Wiki syntax is allowed:
 
tasks/create_mold_for_body.txt · Last modified: 2017/12/03 19:00 by avnerus

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki