Table of Contents

Leaf

The leaf is a basic Pneunet design that is based on the Slow Pneunet architecture. It is based on a research by Harvard University and the molds are designed by Jonas Jørgensen - Researcher at the IT University of Copenhagen.

Fabrication

The fabrication process is based on the slow pneunet design and is similar to the one of the triangle mold and the gripper mold.

Mold files

The mold can be laser cut using the following diagrams

Machine Limitations

The mold can be either 3d printed or laser cut, but the laser cut version would result in a more flat actuator.

Quantities

Basic shape

Oven times

Basic shape

Air inlet

The air inlet is typical for slow pneunet designs: